chore(deps): update dependency esbuild to v0.17.15 #3342

renovate · 2023-04-01T23:04:49Z

renovate commented

2023-04-01 23:04:49 +00:00

This PR contains the following updates:

Package	Type	Update	Change
esbuild	devDependencies	patch	`0.17.14` -> `0.17.15`

Release Notes

evanw/esbuild

`v0.17.15`

Compare Source

Allow keywords as type parameter names in mapped types (#3033)

TypeScript allows type keywords to be used as parameter names in mapped types. Previously esbuild incorrectly treated this as an error. Code that does this is now supported:
```
type Foo = 'a' | 'b' | 'c'
type A = { [keyof in Foo]: number }
type B = { [infer in Foo]: number }
type C = { [readonly in Foo]: number }
```
Add annotations for re-exported modules in node (#2486, #3029)

Node lets you import named imports from a CommonJS module using ESM import syntax. However, the allowed names aren't derived from the properties of the CommonJS module. Instead they are derived from an arbitrary syntax-only analysis of the CommonJS module's JavaScript AST.

To accommodate node doing this, esbuild's ESM-to-CommonJS conversion adds a special non-executable "annotation" for node that describes the exports that node should expose in this scenario. It takes the form 0 && (module.exports = { ... }) and comes at the end of the file (0 && expr means expr is never evaluated).

Previously esbuild didn't do this for modules re-exported using the export * from syntax. Annotations for these re-exports will now be added starting with this release:
```
// Original input
export { foo } from './foo'
export * from './bar'

// Old output (with --format=cjs --platform=node)
...
0 && (module.exports = {
  foo
});

// New output (with --format=cjs --platform=node)
...
0 && (module.exports = {
  foo,
  ...require("./bar")
});
```
Note that you need to specify both --format=cjs and --platform=node to get these node-specific annotations.
Avoid printing an unnecessary space in between a number and a . (#3026)

JavaScript typically requires a space in between a number token and a . token to avoid the . being interpreted as a decimal point instead of a member expression. However, this space is not required if the number token itself contains a decimal point, an exponent, or uses a base other than 10. This release of esbuild now avoids printing the unnecessary space in these cases:
```
// Original input
foo(1000 .x, 0 .x, 0.1 .x, 0.0001 .x, 0xFFFF_0000_FFFF_0000 .x)

// Old output (with --minify)
foo(1e3 .x,0 .x,.1 .x,1e-4 .x,0xffff0000ffff0000 .x);

// New output (with --minify)
foo(1e3.x,0 .x,.1.x,1e-4.x,0xffff0000ffff0000.x);
```
Fix server-sent events with live reload when writing to the file system root (#3027)

This release fixes a bug where esbuild previously failed to emit server-sent events for live reload when outdir was the file system root, such as /. This happened because / is the only path on Unix that cannot have a trailing slash trimmed from it, which was fixed by improved path handling.

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Enabled.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

If you want to rebase/retry this PR, check this box

This PR has been generated by Renovate Bot.

This PR contains the following updates: | Package | Type | Update | Change | |---|---|---|---| | [esbuild](https://github.com/evanw/esbuild) | devDependencies | patch | [`0.17.14` -> `0.17.15`](https://renovatebot.com/diffs/npm/esbuild/0.17.14/0.17.15) | --- ### Release Notes <details> <summary>evanw/esbuild</summary> ### [`v0.17.15`](https://github.com/evanw/esbuild/blob/HEAD/CHANGELOG.md#01715) [Compare Source](https://github.com/evanw/esbuild/compare/v0.17.14...v0.17.15) - Allow keywords as type parameter names in mapped types ([#3033](https://github.com/evanw/esbuild/issues/3033)) TypeScript allows type keywords to be used as parameter names in mapped types. Previously esbuild incorrectly treated this as an error. Code that does this is now supported: ```ts type Foo = 'a' | 'b' | 'c' type A = { [keyof in Foo]: number } type B = { [infer in Foo]: number } type C = { [readonly in Foo]: number } ``` - Add annotations for re-exported modules in node ([#2486](https://github.com/evanw/esbuild/issues/2486), [#3029](https://github.com/evanw/esbuild/issues/3029)) Node lets you import named imports from a CommonJS module using ESM import syntax. However, the allowed names aren't derived from the properties of the CommonJS module. Instead they are derived from an arbitrary syntax-only analysis of the CommonJS module's JavaScript AST. To accommodate node doing this, esbuild's ESM-to-CommonJS conversion adds a special non-executable "annotation" for node that describes the exports that node should expose in this scenario. It takes the form `0 && (module.exports = { ... })` and comes at the end of the file (`0 && expr` means `expr` is never evaluated). Previously esbuild didn't do this for modules re-exported using the `export * from` syntax. Annotations for these re-exports will now be added starting with this release: ```js // Original input export { foo } from './foo' export * from './bar' // Old output (with --format=cjs --platform=node) ... 0 && (module.exports = { foo }); // New output (with --format=cjs --platform=node) ... 0 && (module.exports = { foo, ...require("./bar") }); ``` Note that you need to specify both `--format=cjs` and `--platform=node` to get these node-specific annotations. - Avoid printing an unnecessary space in between a number and a `.` ([#3026](https://github.com/evanw/esbuild/pull/3026)) JavaScript typically requires a space in between a number token and a `.` token to avoid the `.` being interpreted as a decimal point instead of a member expression. However, this space is not required if the number token itself contains a decimal point, an exponent, or uses a base other than 10. This release of esbuild now avoids printing the unnecessary space in these cases: ```js // Original input foo(1000 .x, 0 .x, 0.1 .x, 0.0001 .x, 0xFFFF_0000_FFFF_0000 .x) // Old output (with --minify) foo(1e3 .x,0 .x,.1 .x,1e-4 .x,0xffff0000ffff0000 .x); // New output (with --minify) foo(1e3.x,0 .x,.1.x,1e-4.x,0xffff0000ffff0000.x); ``` - Fix server-sent events with live reload when writing to the file system root ([#3027](https://github.com/evanw/esbuild/issues/3027)) This release fixes a bug where esbuild previously failed to emit server-sent events for live reload when `outdir` was the file system root, such as `/`. This happened because `/` is the only path on Unix that cannot have a trailing slash trimmed from it, which was fixed by improved path handling. </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Enabled. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Renovate Bot](https://github.com/renovatebot/renovate).

renovate added the

dependencies

label 2023-04-01 23:04:49 +00:00

renovate added 1 commit 2023-04-01 23:04:50 +00:00

chore(deps): update dependency esbuild to v0.17.15

continuous-integration/drone/pr Build is passing

Details

continuous-integration/drone/push Build is passing

Details

6892a28bb6

frederick commented

2023-04-01 23:09:17 +00:00

Hi renovate!

Thank you for creating a PR!

I've deployed the changes of this PR on a preview environment under this URL: https://3342-renovate-esbuild-0-x--vikunja-frontend-preview.netlify.app

You can use this url to view the changes live and test them out.
You will need to manually connect this to an api running somehwere. The easiest to use is https://try.vikunja.io/.

Have a nice day!

Beep boop, I'm a bot.

Hi renovate! Thank you for creating a PR! I've deployed the changes of this PR on a preview environment under this URL: https://3342-renovate-esbuild-0-x--vikunja-frontend-preview.netlify.app You can use this url to view the changes live and test them out. You will need to manually connect this to an api running somehwere. The easiest to use is https://try.vikunja.io/. Have a nice day! > Beep boop, I'm a bot.

konrad merged commit 6892a28bb6 into main

2023-04-02 07:26:17 +00:00

konrad deleted branch renovate/esbuild-0.x

2023-04-02 07:26:17 +00:00

dpschen commented

2023-04-02 09:15:38 +00:00

The first fix is interesting. That's something I stumbled upon very often when I got started with TypeScript

This repo is archived. You cannot comment on pull requests.

No reviewers